Transducers
MT871DFB
Dedicated Flow Transducer
The Dedicated Flow Block 871DFB transducer is a one-channel flow measurement module which can be integrated with a flow panel for the remote measurement of air flow in a pressurized cable network. Each flow block outputs standard resistances related with the measured flow. Ranged from 100 KΩ to 3820 KΩ, which can be monitored by any Monitronix monitoring system or Sparton systems. High-performance of pressure sensors and advanced circuit design provide accurate airflow measurement over the range of 0 to 20 SCFH.
- Microprocessor based
- Advanced circuit design
- High-performance of electronic pressure sensor makes the accuracy better than mechanical flow measurement
- Resistance output is compatible with the existing monitoring system and make upgrading easier at a lower cost
- High reliability and longer service life
- Compatible with Monitronix and Sparton pressure monitoring systems
MT872AFB
4 In 1 Transducer, Flow, Current, Pressure And Humidity
The 872AFB is an addressable flow block that is mainly used to measure the flow, pressure, humidity and temperature in the air to a pressurized cable in the central office. It could also measure the duty cycle in an air dryer. It is compatible with Monitronix and Sparton addressable monitoring system.
- Microprocessor based
- Measures flow, pressure, temperature and humidity
- With the measurement of compressor current, computes the duty cycle of the compressor to help the user evaluate the dryer’s efficiency.
- Compatible with Monitronix and Sparton addressable monitoring system s
- With the advanced transducers and efficient design, less than 0.15 psi pressure drop through the 872AFB
- Advanced compensation techniques gives high accuracy for flow measurement
- LED indicators for RUN and PAIR status
- Electronic address setting using a portable tester
- High resolution and accuracy
- Drop-in replacement for old mechanical type flow panel
881APT
Addressable Pressure Transducer
The 873AD is an advanced, high reliability solid state dedicated flow block which is mainly used to measure single flow, pressure, temperature and humidity of the dryer air output. It is fully compatible with Monitronix and Sparton monitoring systems. The 873 has two models, which are 873U and 873AD, the 873U is generally used in a underground cable, and the 873AD is used in an air dryer.
- Measures flow, pressure, temperature and humidity
- Compatible with the universal module and dedicated module of a Monitronix monitoring system and retrofitted Sparton system with Monitronix boards
- Use just a conventional dedicated transducer, easy to program
- Can be intermixed with other Monitronix solid state dedicated products on the same report pair
- With the advanced transducers and efficient design, less than 0.15 psi pressure drop through the 873
- Advanced compensation techniques gives high accuracy to the flow measurement
- Fully sealed structure, water-proof
- Drop-in replacement for old mechanical type flow panels
Transducer MT873AD
4 In 1 Transducer, Flow, Current, Pressure And Humidity
Today we have only one model to offer to our customers. This dryer is designed and built with all Monitronix parts and electronics.
Transducer MT873AD
4 In 1 Transducer, Flow, Current, Pressure And Humidity
883SPT External Pressure Transducer
The 883SPT is an advanced, high reliability mini solid state dedicated pressure transducer that comes in two models, used to measure the air pressure in pressurized cable monitoring applications. The 883SPT-U is for underground applications, is goes inside a splice case; and the 883SPT-C can go inside cabinets. This transducer can be used as a direct replacement for the mechanical bellows type resistive transducers, and is fully compatible with Monitronix systems and retrofitted Sparton systems. The unit is programmed using the MT860ATT portable tester, like address and altitude offset compensation.
- Fully encapsulated
- Solid state absolute pressure sensor with programmable altitude offset
- Higher resolution, accuracy and reliability than the replaced resistive transducers
- Compatible with all Monitronix systems and retrofitted Sparton Systems
- Programmable using the standard MT860ATT portable tester
- Can be intermixed with other Monitronix solid state dedicated products on the same report pair
- Up to 8 transducers can be placed in one input
